In SCIET Theory the SCIET Algorithm is presented as a standalone action in order to model it simply. It is important to understand that the SCIET of physics only exists as an opposite and equal reaction to another body in space. Both bodies receive an informational feed from the midpoint and convert it into Quantum Layers using that information. In the physical realm, the SCIET functions symmetrically, and complex bodies will possess multiple midpoints with symmetrical feedback as these are combined bodies made of multiple quantum layer fields.
Alternatively, in the realm of consciousness, the SCIET Algorithm is descended from the original First Action of creation and remains able to use the SCIET Algorithm to create within the mind. The difference here is that the living being is an evolved SCIET, with its Point of Awareness actively engaged in projecting its evolved Quantum field into the environment to survive.
Symmetry in physics is widely studied and well understood, with new insights published regularly. In SCIET Theory it is a basic rule related to the balance of energy/information between immaterial Points of Awareness. Notice that it is the immaterial Points of Awareness that are being balanced in SCIET Symmetry. This is not based on electromagnetism, and although it leads to an increase in quantum values, no physical change is noticed.
On the right, we see two SCIETs in alignment on top and below Third SCIET(C) is illustrated at twice the size in order to convey that its quantum layer field represents both (A) and (B). In practical observation, this would be considered the center of gravity of the two bodies, for gravity is the manifestation of the quantum layers that exist around all objects beginning with its atomic structure.
Additional information integrating Symmetry in Physics will be added here later.
All Cosmologies begin somewhere, be it the vast emptiness of the Void, or the swirling clouds of mist before the entrance of the creator. The SCIET Cosmology begins in an aware void into which a point of awareness manifests and begins the chain of actions that become the Universe.
SCIET Theory contrasts with the Big Bang Cosmology in that it begins a conscious reaction which then expresses curiosity about its presence. Curiosity defines everything to the smallest degree before reacting to the limitations it encounters, which it then records to memory in the form of nuclear particles.
The Big Bang does it differently, beginning with a nuclear particle that explodes into the area around it to create all the particles and energy in the Universe. It does not account for where this happened or how the matter was there to explode, or why it would explode. One idea is that the proton-sized particle is the consequence of a prior universe collapsing, and its subsequent explosion was related to cavitation. This raises one to question: how something already existed if this is supposed to be describing the beginning of the Universe?
SCIET Theory uses several assumptions from the Big Bang Cosmology but adds important features before the Atoms fill Spacetime. These features are responsible for aspects of Consciousness, the nature of Spacetime, and the existence of immaterial resonant points that become the first protons. Each of them continues to play a significant part in the evolution of consciousness and the material Universe.
This list summarizes the twelve important ideas contributing to etheric physics that can explain the nature of the Soul, Consciousness, the process of thought, the nervous system, the mind-brain relationship, and the formation of matter for example.
The Awareness- called the Void in conventional science, it is limitless and does not interact with the Fabric of Spacetime.
Intrusion- it is a point of awareness that has descended into the Awareness from a larger reality where it exists at a more energetic state. It is the same size as the smallest increment defined by the Geometric Vortex.
The First Action- The intrusion is aware with intention and seeks to define its location within the Awareness with a SCIET Line to the distant edge. This Action defines all the following fractional subdivisions of the Geometric Vortex.
The Geometric Vortex Algorithm (SCIET) Collapse– beginning with an attractive reaction at the center of a tetrahedral reaction to its existence within the Awareness, the fractional collapse along the SCIET Line stimulates the simultaneous formation of a series of tetrahedral structures in fractional frequencies. The coexistence of the tetrahedral structures around the Intrusion causes each to interact at an equidistant angle to one another. The attractive values of the tetrahedrons generate a pentagonal column along the shared edges of the twenty tetrahedrons to form twelve frequency clouds whose values cannot match the tetrahedral fractional sets, creating a set of monopole harmonics that do not assimilate inwardly but remain in the space where they were created.
The Fabric of Spacetime- The First Action is followed by a continual collapse of tetrahedral values toward the value defined by the Intrusion. Each step leaves a set of twelve pentagonal monopoles remaining in the space defined by the Geometric Vortex. At least 260 steps are required from First Action to the formation of Atoms, so all of the Spacetime is filled with the pentagonal monopoles created by the collapse of the Geometric Vortex or SCIET.
Points of Awareness- The collapse of the First Action into the Geometric Vortex repeats until it reaches the Intrusive Minimum, the same size as the original Intrusion, where it matches another value for the first time and begins to resonate with it. The end of the First Actions Collapse leaves the tetrahedral structures active within the pentagonal monopoles to create the Point of Awareness at the center of each Proton.
The Intrusive Minimum- The creation begins with the intrusion of the external Awareness into the internal Awareness, in the form of the Intrusive Minimum, which becomes the minimum sized definition for Spacetime. This tiny value triggers the release of all the energy in the Universe in the form of the collapse of the Geometric Vortex.
Resonance of Points of Awareness- The Points of Awareness contains both the tetrahedrons in resonance with one another to form active pentagonal corridors in twelve monopole angles, each of which has unique qualities in the context of an environment filled with similar values.
Resonance Return Algorithm- The beginning of resonance is the result of the final value created by the continual collapse of the First Action matching the value of the Intrusive Minimum. Both are Points of Awareness with twenty active tetrahedrons and twelve pentagonal corridors of external interactivity. The tetrahedrons power the Pentagonal Corridors but do not interact except with the Awareness, which maintains a continual attraction to them, for they are of the Awareness.
Return Span Alignment- Like a guitar sting being plucked the Resonance Return Midpoint Value travels back to each Point of Awareness as a value harmonic to both Points of Awareness, having both the Tetrahedral values and the Pentagonal values intact.
Return Orbital Algorithm- When the Resonance Return Midpoint Value approaches the center of the Point of Awareness, it arrives with one angle of its pentagonal corridors spanning the center and the tetrahedral values continue to reduce into the center, while the Pentagonal values follow the path indicated by each successive angle outward from the center until they reach a level parallel to the incoming direction.
Return Orbital Shell Formation (Proton)- The Resonance Return Midpoint value continues on parallel to the center, orbiting continuously to form the shell of the Proton.
As you can see, SCIET Theory defines a number of conditions, qualities, and algorithms before matter fills the Universe, but once matter exists, it can conform to conventional physics and astrophysics, beginning at the point when space begins to clear and visible light pierces the darkness.
Current views related to the Big Band version of cosmology want to explain the observations of astronomers, particularly the Red Shift seen in observations of distant galaxies. Based on these observations it has become imperative to explain why so many of the observed galaxies seem to be hurtling away from our solar system. Hurtling is a good word for this since they are reported to be separating from us at the speed of light. From Wikipedia:
American astronomer Edwin Hubble (who the Hubble Space Telescope is named after) was the first to describe the redshift phenomenon and tie it to an expanding universe. … “This redshift appeared to be larger for faint, presumably further, galaxies. Hence, the farther a galaxy, the faster it is receding from Earth.”
From Wikipedia
Most modern Cosmologies seek to explain this, and a commonly accepted version of this uses the notion that a tiny dot of matter exploded into all the matter and energy in the visible universe. So the short form of this is that the Void was empty except for this dot, and that its explosion accounts for everything that is.
SCIET Theory offers an alternative. In SCIET Theory the tiny dot is the intrusion of intention into the vast awareness of a great mind, much like might be described for an individual meditating deeply, so deeply that space is entered that is empty of everything other than the mental focus of the meditator. The entire realm is one of the meditator’s Awareness with the focal point intruding into the center of this realm. Once the meditator realizes the entry into a new realm, the stage is set for the First Action, which can be thought of as a burst of intention from the meditator’s larger reality, a decision and intention to create within the new realm.
The qualities of Awareness set the stage for all that follows. It is a realm that is of the same qualities as the intrusion and subsequent First Action, but is limitless and exists only to allow the creation of a limited realm within which difference can be explored. The First Action is meant to define limitations and set the stage for the evolution of difference.
The Awareness is within and without, it is within each particle and surrounds the creation as well, for the First Action leads to a geometric vortex whose continual fragmentation into identical parts moves inexorably toward the value defined by the original intrusion into the vast Awareness. At its arrival in equivalent value to the intrusion, it is upon a floor of matching values where at last it can interact. and so begins to resonate with these matching values. The equivalent value has at its center an opening to the Awareness, for regardless of how many fragmented reductions it may achieve, none can be as small as those that exist in the Awareness.
At the smallest values reaching the Awareness, resonance cannot proceed past the center and so a continual opening to the Awareness always exists at the center of any interactive fragment or geometric vortex within the realm created by the First Action. This is the definition of a Point of Awareness.
Interaction in the realm of Spacetime requires matching values or adjacent values, which are those values that are just above of below any defined value. The qualities of the Awareness can be used to jump from one part of Spacetime to another by causing the fractional layers to separate using circular motion sufficient to cause them to adhere to one another until they leave an area in the center that reveals the original Awareness. Because the Awareness does not interact with the limited realm, any fragment passing into this opening will assume the values of the layers of the limited realm on the inside of the opening. When this happens the fragment of the Limited Realm appears at the values defined by the inner layers.
The Awareness is always present in all spaces of the realm created by the First Action but is not accessible except through the center of a fragment, a Point of Awareness, whose values are adjacent to its own, so at the center of all created fragments a doorway, the Point of Awareness remains open to the original Awareness.
The convergence of values at the doorway results in their unity with the unlimited Awareness, or unity with all that is in the Universe. And so any resonance with the Doorway forces unity, and it is this value that underlies the nature of consciousness.
The Awareness is limitless and cannot interact with the limited realm of creation. It is separated from the creation by the energetic pattern left in the realm of limitation by the First Action’s descent toward the original intrusion. Since the geometric vortex (the SCIET) reduces the First Action to just 1/1048577 in twenty fractional subdivisions and it continually reduced at least thirteen times to achieve the volume of atoms created by the resonance with the value of the original intrusion, there are that many fractional layers of energetic pattern in the realm of Spacetime. This can be thought of as the formatting that defines the realm of limitation.
Spacetime in SCIET Theory
Spacetime is easier to understand in the context of Einstein’s Relativity theories. It is what many refer to as the Ether, but it does not flow, it clings to itself and objects that are made from its fabric. The cling effect is can be understood as the time required for an object to come to rest after it has been moved, the “cling” is actually seen as momentum as the energetic connections between the objects in spacetime regain their balance with their environment.
The notion that it (Spacetime/ether) flows is not supported by SCIET Theory, it is the remnant of the First Action’s descent toward the original intrusion. Each geometric vortex fills the space defined by its First Action, or measure with smaller geometric vortices that are fractional subdivisions of the First Action. This occurs in twenty levels with the last being just 1048546th of the first one. When the last geometric vortex completes, the cycle begins again using that value as the First Measure of a new geometric vortex. Repeating this seven times results in a volume of these geometric vortices equal to the number of atoms in the universe.
The process that creates these atoms leaves a pattern in space from each level of reduction required to arrive at the size of the atom. Each geometric vortex has twenty levels of reduction and there are thirteen reductions until the size of the atom, so thirteen times twenty is two hundred sixty levels within the fabric of space that makes up Spacetime.
Functions of Spacetime
Spacetime is the energetic remnant of the First Action on its way to creating matter. It consists of at least 260 layers of geometric vortex imprints throughout the created Universe. At the point when the geometric vortices reduce to the same size as the original intrusion, the reducing layer resonates with the layer of the original intrusion and this resonance forms the atoms that begin the material creation.
Spacetime is a barrier between creation and Awareness. Interaction in the realm of Spacetime requires matching values or adjacent values, which are those values that are just above or below any defined value.
The “stickiness of Spacetime” can be used to jump from one part of Spacetime to another by causing the fractional layers to separate using circular motion sufficient to cause them to adhere to one another until they leave an area in the center that reveals the original Awareness. Because the Awareness does not interact with the limited realm of Spacetime, any fragment passing into this opening will assume the values of the layers of the limited realm on the inside of the opening. When this happens the fragment from the Limited Realm of Spacetime appears at the values defined by the inner layers. This SCIET speaks for a portal to a distant location.
Resonance of Atoms in Spacetime
Each atom is a spherical memory and all atoms are of similar size, so they are in resonance with one another throughout Spacetime, although the resonance is greater when they are close together. In physics, this is the inverse square effect. This atomic resonance is not the same as electromagnetism. The resonance is due to the formation of ever larger scalar fields, basically, resonance fields created by the atom’s presence in space because a geometric vortex is triggered by the memory sphere, leading to another memory sphere using the diameter of the proton as its First Measure. This is produced by movement, causing the proton to trigger an adjustment in spacetime based on its new position. Although the adjustment forms a new memory sphere away from the proton shell, this adjustment is responsible for electromagnetism. The memory shell that is formed by continual feedback from other protons is known as the electron.
What the Pyramids tell us about Spherical Memory Layers and Form Resonance
This is the Alexander Golod Pyramid near Moscow, the photo is from a Russian language website
The concept of Pyramid energy was recognized in the twentieth century and extensive research has shown it to be a significant effect, best described as negentropic, meaning it causes the matter affected to become more ordered, organized, and stable. SCIET Theory provides a clear explanation of this.
Its opposite is entropy, which is the steady loss of energy that leads to the disintegration of objects over time.
Why is the Earth’s rotation on its axis important to Pyramid energy? This question remained after the other peculiarities of the Great Pyramid seemed to be obvious. Its symmetry was required, but its angles and scale were not, smaller pyramids with different angles of the slope also worked well.
The Russian Pyramid research has shown that the most effective angle for the greatest pyramid effect is using the Phi triangle for the sides. The Phi triangle uses the numbers of the Fibonacci series for the sides of the triangle and this makes the pyramid a lot steeper than the Giza Pyramids. The drawback to this shape is its vulnerability to wind or ground vibration such as earthquakes, and the 144-meter pyramid in the image was seriously damaged in a storm several years ago.
Four triangular sides of varying proportion joined at the top above a central point upon a perfectly level and square base would work so long as the base was aligned to true north. Like the Giza Pyramid, there could be no metal in its construction.
This photo was taken by Gatenbrink, whose robot this camera is attached to, later investigators sent a camera to take better photos of the engraving and were able to interpret it to the 8400 BC era. It had to have been done during construction when the top stone was added to this chamber.
The Giza Pyramid’s design is intended to help it resist earthquakes, such as the slightly concave sides and its angle and height, which keep it stable when the ground moves in an earthquake. These design features have enabled it to remain intact for many thousands of years, and only the disrespect and arrogance of local governors caused it any damage since it was completed in 8320 BC. (the engraved star map shows this date on the rock at Gatenbrink’s Door), the data related to Kufu in the mid-third millennium is due to the control of Free Masonry, a group that is dedicated to bringing in a “New World,” which in their view, means control of history. To this end, they have worked to define the history of Humanity as beginning in the Fifth Millennium. This history has no giants, alien contact, or worldwide civilizations that left ruins everywhere. because they did not exist.)
Believing it must contain treasure, a governor of Egypt opened a hole in the side and after that, a continuous stripping of the outer casing left it as it is today. Only a small remnant of the casing now remains near the top.
David Wilcock’s Research
David Wilcock has written and presented extensively videos about pyramid energy and other subjects related to Spherical Memory Layers. He has a website and a Facebook page as well.
His Pyramid presentations have emphasized the increase in stability of all systems around the pyramids in all directions. Increases in the fertility of the land and the growth of plants are important aspects he reports. Among the benefits he reported are:
A simple drug that helps people fight viruses suddenly becomes 3,000 percent more powerful.
Just one milliliter of a simple placebo of distilled water stored in the pyramid was administered to twenty different premature babies who were almost certainly going to die, and every single one of them enjoyed a complete recovery.
Two groups of normal white laboratory mice were given strain 415 of the virus S. Typhimurium (typhoid fever) in equal amounts over the course of one day. The only difference was that one group of mice was kept in the pyramid, and the other was not. Amazingly, 60 percent of the mice in the pyramid survived smaller doses of the virus, whereas only 7 percent survived in the control group.
Using a Russian instrument known as a “military locator,” similar to radar, a column of “unknown energy” was detected around the pyramid—some five hundred meters wide and two thousand meters tall.
An ozone hole that was directly over the pyramid closed up only two months after they built it.
Pyramids built over oil wells made the oil 30 percent thinner, thus causing production to increase by 30 percent because the oil was so much easier to pump
Agricultural seeds in the pyramid for one to five days before they were planted. This was done with more than twenty different seed varieties planted across tens of thousands of hectares. In every single case, the pyramid seeds experienced a 20 to 100 percent increase in crop production. These plants did not get sick and were not affected by droughts.
Wilcock has written The Source Field Investigations, including his years of work with anomalous phenomena. It is a treasure of detail and insight about so many things that are not well understood in science today.
Long before Wilcock’s book, another investigator was informing the world about pyramids.
Patrick Flanagans Research
Patrick Flanagan wrote Pyramid Power in the 1960s to present his research on pyramids. He included his research on the pyramids but little theoretical discussion except for the ideas about vortex energies.
The book has extensive notes on his experiments, not only on pyramids but also on the energy systems he tested with the pyramid. If you need a thorough knowledge of the Giza Pyramid, this book has all the details, including those related to his tests on many objects placed into the pyramid for various amounts of time.
Chapter eight is the most interesting as it discusses Theories of Energies, Ether-Vortex, and Subatomic Vortices and Forces.
Flanagan was a gifted physics student and won a science fair by designing an intercontinental ballistic missile detector while in high school, resulting in interest in his career by the military, which may have influenced his later work that avoided anything that may cause their interest to resume. His early work was innovative within the context of personal experiences people could have using the devices he developed. A charismatic showman, when presenting his work, he flourished by selling personal devices and experiences.
Pyramids and Spherical Memory Layers
The Scale of the Spherical Memory Layers is extremely tiny. The layers are very thin, measured in Planck units; an eighth of an inch would be about thirty million trillion trillion Planck Units thick, so given the number of bodies in resonance with the planet, the layers will vary in volume at any one elevation. The most common demonstration of this effect in action is the Pyramid.
Shape affects how an object interacts with the Earth’s Spherical Memory layers, as does its symmetry and alignment with the planet’s rotation. Together these factors control the Form Resonance of the Pyramids.
Form controls the focus of the interaction of the layers with an object
Alignment to the planet’s rotation affects the interaction with the layers aligned to the rotation.
Symmetry affects the rule of squaring of natural forces because when the object resonates with the layers, the resonance converges on the center evenly.
A properly aligned pyramid shape causes the Spheric Memory Layers to nest one in the other in a descending pattern.
The nesting reinforces the resonance to build a powerful cavitation effect on molecules, making them resonate in tune, and become stronger in their attraction to their center. Note that the effects of the Pyramid cause a continual enclosure to grow around the smallest value created at the top, which makes all affected objects experience a uniform ordering of all structures from the largest to smallest.
The intersection of the Pyramid’s elevations causes a geometric vortex to form that creates a Spherical Memory Layer, so it is that Sphere that is nesting from top to bottom.
The Pyramid Effect is caused by the right shape, proper alignment, and nesting to build a powerful cavitation effect in molecules, making them resonate in tune so they become stronger in their attraction to their center. In this way, it works in opposition to entropy
Below is an illustration of a pyramid with a view facing the corner, with the earth’s layers apparent as the horizontal lines.
The circles represent SCIET Spherical Layers created by the pyramid intersecting the Earth’s SCIET Spherical Layers. The descending edges are aligned with the equatorial circumference so that the incline creates a steadily enlarging enclosure. In SCIET Theory, this increases the magnitude of the effect. The Corner illustration shows the Giza Pyramid in profile looking straight at a corner; from this angle, we view the widest appearance, with the 51°51″ sides meeting at the corners to create a slope of 41º59’50” to produce the effect above. What we are looking at is a SCIET Memory Sphere system that nests around the entire structure. The SCIET Spheres are created by the interaction of the Earth’s Memory Spheres with the aligned mass of the pyramid. Alignment to magnetic north would prevent lines of force from disrupting the subtle fields being focused. The corner angle, at about 42 degrees, enables a complete enclosure of the structure by SCIET Memory Spheres in a specific though gradual increase due to the acceleration of gravity as illustrated in the Corner view. The Side View combined with the Top View illustrates that the side’s angle of incline affects the internal resonance only, making it entirely the result of the mass and achieving a denser Spherical Memory Layer effect.
This illustration offers an analysis of the pattern of the nested spheres created by the slope of the corners, about 42 degrees. It is interesting to see that the top of the spheres is above the point of the Pyramid, surrounding it like a halo.
Since the slope of the sides is different at 51º51′, it creates a different set of nested spheres within the mass of the pyramid. Overlying the two sets of nest spheres should reveal why the King’s Chamber is the most impacted part of the pyramid. Look at the effect below the plateau’s surface; there is a tremendous effect underneath the Pyramid.
The Pyramid form compounds the effects of the layers on it. When it is perfectly level, has the right slope to its sides, and is aligned to the rotation of the planet, it interacts with the layers to create a lens effect for the pyramid focusing the effect of the layers so that it is magnified to affect the entire area with a very high negentropic effect at the Planck Unit scale.
Generalizing the Pyramid Effect
Generalizing the Pyramid effect to all Science
SCIET Theory reveals that properly aligned Pyramids are effective because of the Quantum Spherical Memory Layers that surround all Bodies in Space. It is the presence around the planet of these highly energized layers of energy.
These layers are horizontal to the surface and aligned with the rotation of the planet, and this is why the pyramids need to be aligned to the true north. The pyramid also must be level, its sides must be identical in size and shape leading to a point above the center of a square base.
The proportion of the base to the height has been tested for the best effect and surprisingly the most effective is one based on the Phi ratio rather than the Giza Pyramid, which suggests that it had multiple purposes of which the anti-entropic effect was only one. The symmetry of the Great Pyramid was required, but its angles and scale were not, smaller pyramids with different angles of the slope also worked well.
All of these issues are addressed with SCIET Theory.
Form Resonance is a term describing how a body on the surface interacts with the Planetary Quantum Layers, it stimulates a resonant reaction, in other words, it creates another Quantum Spherical Memory sphere using a vortex above the point on the interactive body. T
This effect is particularly important when learning about the spiritual entities associated with the body in Vedic literature since each vortex connects to an existing frequency of information. Above each shoulder is the site of a vortex, and each of them holds information related to the living being. Of course, there are many vortices of the body and each has a name in the Vedic literature.
What happens when the pyramid interacts with these layers of energy is discussed next.
Spherical Memory Layers
The speed with which the pulses stream into the center and span means that each one can have only a little information, with the volume being the source of context and meaning. This process can work to provide an internal view of the surrounding space in the brain/mind or to form shells of energy around the Point of Awareness at the center of a proton. Evidence is coming in that this process exists at the level of astronomical bodies and is the basis of the layers that surround planets and are responsible for gravity.
Interaction Between point/objects Creates Quantum Spherical Memory Layers in Spacetime. Everything else written here leads to this one rule. But before we learn how this happens, let’s get right into the discussion about layers or Quantum Spherical Memory Layers.
This image of an iron nucleus is created with a radiation microscope. It validates the formation of shells by streaming reactions between resonant bodies. I conducted a search for similar photos taken by the same process, but nothing about this can be found online. This image and the ideas that it provokes are a contradiction of the conventional model
SCIET Theory reveals that the power of pyramids comes from their interaction with the SCIET Quantum Spherical Memory Layers that surrounds the earth and all bodies in space. The layers are based on the same effect of quantum resonance that forms proton shells. Each layer is related to resonance with another body in space, and for this reason, they continue to grow as the universe evolves, becoming thicker with age. Even so, the layers are only Planck Units thick and interact easily with molecular structures on the surface of the Earth.
Understanding that the Earth is surrounded by Quantum Spherical Memory Layers, which are based on the matter of the Earth and whose thickness is measured in terms of Planck Units is easy with the right ideas.
The layers are thin because they originate from the interaction between protons, the most basic unit of matter. They are measured in Planck Units, even those surrounding Black Holes and stars, so it is easier to think of these layers as a sort of stratified atmosphere of quanta around all bodies in space. Perhaps the most intriguing research relating to this was found in the 1990s.
The Quantum layers originate with the formation of protons from the interaction of the minimum units before anything else existed. The shells of the first protons are made of Quantum Spherical Memory Layers and then the protons become a source of another set of new interactions, as does everything that is formed after the beginning. Each new size spherical layer creates more ad infinitum. Conglomerations of molecules become bodies in space that interact to create layers of Quantum memory spheres around themselves, and these layers continue to form at the same rate today. Everything is becoming more layered and dense.
Comparing the Bohr Model of the Atom to the image of the iron nucleus shows that the models in use relate to teaching chemistry and are not intended to to actually illustrate reality.
One visualization exercise that is helpful is to imagine a balloon that has another balloon blown up inside of it. with both of them individually pressurized and independent from one another, but so close that they almost touch. Now imagine that these balloons exist continuously away from the earth with their thickness growing thinner as they get further away from the center. This vision of layers can be applied to all bodies in space.
When a layer encounters a molecular structure, a resonant reaction begins that creates a Quantumspherical memory shell around the molecular mass, which resonates continuously until it is no longer engaged with the layers. This idea is pivotal to understanding Form Resonance.
Sensory Nervous System
All life has evolved in the presence of the Quantum Spherical Memory Layers of the planet. While additional systems of layers have evolved using other types of energy and fields, the Amino Acids that make up the nucleus of the cells are based on the Spherical Memory Layers of molecular structures, just like the planet,
The pyramid is stationary as it interacts with the Quantum Spherical Memory Layers of the Earth, the living body moves through them. As illustrated this movement causes a symmetrical rotation of the body’s own Spherical Memory Layers, with the fields on each side of the body converging in the middle. These layers are based on molecular energies from the planet and from the body. Other fields are involved but the layers of the Earth are mainly affecting those in the body that relate to its own molecules and mass.
Einstein’s thought experiment about the elevator simulating the effect of gravity tells us that the forward movement of animals creates a type of acceleration of gravity within the complex organism and that this stimulates the formation of Quantum Spherical Memory Layers that become the basis for its evolution. Plants depend on gravity and the movement of the environment around them for the evolutionary stimulation they need, while animals move around the environment for this stimulation. In both cases, the Quantum Spherical Memory Layers that surround the planet is used to drive an energetic adjustment that results in their evolution.
Black Holes
Researchers have found that when a single bit of information enters a black hole, its surface area increases by a very precise amount: the square of the Planck length (equal to an incredibly small 1.6 x 10^-35 meters on a side).This may not seem all that interesting that a black hole gets larger when matter or energy falls into it, but the surprise here is that it’s the surface area, not the volume, that grows in direct proportion to the infalling information, which is totally unlike most other known objects in the universe. For most objects that we’re familiar with, if it “consumes” one bit of information, their volume will grow by one unit and their surface area by only a fraction. But with black holes, the situation is reversed. It’s like that information isn’t inside the black hole, but instead stuck to its surface.Space.com
Every large mass is surrounded by these layers derived from ancient and ongoing relationships with other large masses. In the 1990s researchers discovered that when information enters a black hole (as an example) its surface area increases by a very precise amount, the square of the Planck length (equal to an incredibly small 1.6 x 10^-35 meters on a side).
Cosmologists have used Einstein’s General Theory of Relativity to visualize what the beginning of the universe was like. By using the GTR equations, but working them backward, they have been able to see where inflation began. Not surprisingly, the calculation leads back to a size matching the Original Intrusion before the First Action, which sits at the center of every Proton, and whose effects account for the Quantum Spherical Memory Layers that surround all bodies in space.
Astronomers researching Black Holes have found that energy/information entering a Black Hole does not add to the volume, but to the surface area, so any stream of information exchanged by bodies in space would continually add to the surface surrounding the center point of the body in space. This is where the layers come from, and this is confirmed by what has been observed by astronomers. What remains for the scientific community is to research and conclude that this phenomenon is true of all interacting objects in space.
“Stuck to its surface” is an interesting way to describe the SCIET Quantum Spherical Memory Layers that accumulate around bodies in space. It is indicating that the Point of Awareness at the center of the Proton is still the operative force creating Quantum Spherical Memory Layers around large bodies as well as around protons.
At first blush, it may not seem all that interesting that a black hole gets larger when matter or energy falls into it, but the surprise here is that it’s the surface area, not the volume, that grows in direct proportion to the infalling information, which is totally unlike most other known object in the universe. For most objects that we’re familiar with, (i.e. planets) if it “consumes” one bit of information, its volume will grow by one unit, and its surface area by a only a fraction. But with black holes, the situation is reversed. It’s like that information isn’t inside the black hole, but instead stuck to its surface.
Gravitational Lens
Astrophysicists studying the concept of gravitational lensing predicted in Einstein’s Theory of General Relativity have proven through observation that when a star is occulted by a large body in space, the light from the star can be seen shining on the edges of the surrounding ring, the Einstein Ring, of light. This is due to the Quantum Spherical Memory Layers.Gravitational Lens effects are seen in space confirming Einstein’s General Theory of Relativity. In the theory, space is distorted by the enormous mass of a star causing light to travel along the distortion to appear as though it is coming from a different location than it is. The idea has been confirmed on numerous occasions.SCIET Theory proposes that all bodies in space are surrounded by Quantum Memory Sphere Layers which would achieve the same “gravitational lens” results for a different reason. The SCIET Quantum Spherical Memory Layers exist, they are not just an effect of gravity, in fact, they are the source of gravity because they interact with all other bodies in space, seeking balance as they change positions with one another.Light travels in space through its fabric, which limits its speed to the rate of change based on its beginning. The Quantum Spherical Memory Layers are made of the fabric of space so light travels through the layers at a rate relative to the density of the layers. This means that it prefers to travel at the same density as in normal space, and so tends to reach the layers that match this density and propagate through them in the most coherent way.Like the effects of a rainbow, the Gravitational Lens phenomenon depends on the position of the observer, much the same as any reflected light.
Gravity
Conceptualizing that all astronomical bodies are surrounded by Quantum Spherical Memory Layers measured in Planck Units, suggests that the interaction between them by objects as small as rocks or as big as stars would cause a resonant effect within the layers.
Quantum Spherical Memory Layers surround each object in space with layers that are interactive with other objects and exist in continuous adjustment or resonance. The layers are the permanent memory of the object’s interactions during its existence. Their thickness is measured in Planck Units, so these layers affect all molecules.
Einstein’s General Relativity proposed that gravity distorts the space around objects like bowling balls on a mattress, but his approach only addresses massive objects.
SCIET Theory can supply a conceptual explanation. It conceptualizes gravity as the resonance of the SCIET Spherical Memory Layers between two bodies, with the larger body gradually causing the smaller body to resonate with it. Since all bodies are already in resonance the change in the smaller body registers as dissonance with other bodies. This means that gravity has both push and pull components.
Consider that the SCIET Quantum Spherical Memory Layers exist as Planck Unit interactive layers, which affect each and every molecule within the mass of an object. Movement causes each mass/object to adjust to its change in position relative to its rest position.
The speed of light is limited, and since the object is made of the same fabric of space that limits the speed of light, the rate of change in the matter is also limited. As a mass/object approaches a body its rate of change increases at a set rate until it reaches it’s maximum related to the limits related to the speed of light. Each body has layers that interact in the same way, so the squaring effect is related to the effect of both bodies interacting, it is a combined value.
The mass/object adjusts its resonance to match that of the attracting body, and as it does so becomes more and more in tune with the attracting body until joins it and stops accelerating, and continual adjustments end.
Formation of Matter
The Formation of Matter is by the continuous layering of Quantum memory around the center of a proton.
The formation of matter is the result of the completion of the resonance of the geometric vortex to the level of the original intrusion. Once matter exists, the same rules of resonance affect all matter just like the original that created protons. An important idea that needs to be included in this is that all of the resonant parts continue to resonate with one another as new resonant forms are added, in this way the entire universal system evolves as an interconnected web of complexity, all based on the same systems.
Conclusion
Since the very first atom, everything in the Universe has been reacting to everything within its line of sight. When atoms formed molecules, and molecules formed conglomerate masses, they all resonated with one another. In all cases, this resonance led to the formation of memory spheres, a continuous record of their relationship. Spacetime began with the First Action of the Geometric Vortex without matter in it, but the matter was added throughout it almost immediately. Since then matter has continually added Spherical Memory Layers that surround each atom, molecule, and conglomeration of molecules into bodies in space. So the effects on bodies in space depend on these three concepts
The Quantum Geometrical Vortex (the SCIET) and the First Action
SpaceTime is created by the Quantum Geometrical Vortex during the descent to the level of the original intrusion resulting in Points of Awareness
Spherical Memory is created by the interaction of points of awareness which has continued to increase in complexity over time.
All action in space depends on these three concepts. The formation of matter is the result of the interaction between Points of Awareness at the level of the Original Intrusion, which activates the adjustment between bodies using the Geometric Vortex and the First Action to establish the resonance that returns to the Point of Awareness where it transits to an orbital path around the center, creating the Quantum Spherical Memory Layers that are the shells of Protons.
What this generalizes to is that all matter creates Quantum spherical layers of energy around itself, and at first, these are limited to interacting with others of almost identical form, but as they grow larger they become layers that surround masses of matter and the operational source of gravity, and as life evolved, the basis of the nervous system in animals.
The Giza Pyramids are evidence that Quantum Spherical Memory Layers exist, and they are the primary instruction we have that has propelled us toward their discovery.
It may be that the ancients knew that the people of the future would eventually realize this by analyzing the Great Pyramid. For this reason, the most important consequence of their study may be the existence of Spherical Memory Layers surrounding our planet and all other bodies in space.
Sacred Geometry and how it compares to SCIET Theory
Sacred Geometry is taught as a tool to understand Ritual and the formation of thought patterns that can exist independently of their creators.
The forms are geometrical because they relate to the underlying structures that allow energy to remain intact. In SCIET Theory these forms are revealed as preliminary to the formation of matter and underlie all matter.
The Dodecahedron is inside of the icosahedron in SICET Theory. Its vertices are at the center of the tetrahedrons composing the twenty planes of the icosahedrons, which make them in phi relationship to the radial extension of the tetrahedrons.
In SCIET Theory, the Awareness conceives of other (duality) and creates a connection to it, and the line exists. The line connects to every difference within the Awareness until it exceeds the capacity of the system to describe it, and then begins a new system based on that value.
After the point of Awareness conceives of connecting to others, the line defines all potential others within the Awareness. This is a process of internal definition, described in SCIET Theory as a subdivision of the One, the First Action.
Understanding how we come to this conclusion requires that we observe the role of matching frequencies within nature. The most common way to explain this is the crystal radio demonstrating the ability to isolate particular frequencies, each is matched to a value progressing upward or downward. Matching is then described as a principle of nature, the Rule of Like interacts with Like. From this rule, we work toward what must have come before matter and find the connecting line and the point of Awareness. Each has its own domain of existence in which all like it interact with one another.
After the first two concepts exist, a third concept is created, that of resonance.
To review, the first to exist is awareness, the second is a connection to others, (duality), and the line that represents it. These two define the range of others within the awareness. When the definition is complete, it has reached the value defined by Awareness as itself, its smallest defined value. When the process of definition reaches the value of Awareness it can no longer subdivide since it has reached the floor of its range of definition. The smallest value preexists the beginning of definition and forces the reducing values to react to it, thus beginning Resonance within the system.
Rituals use this process to create resonant forms capable of being self-contained holders of information and intention.
Resonance creates spherical forms that retain the information that created them.
Obviously, there is a difference between traditional sacred geometry, which is meant to provoke the mind of the aspirant, and how nature really works. Before the development of technology, there was no way to define the various levels of natural forces except through the experience of consciousness. The dilemma here is that consciousness interacts with itself, sensing only those parts of creation that possess awareness.
Seeking to define and control spiritual growth and development had to use what could be presented and taught before attaining Initiate status. Sacred Geometry is designed to communicate real qualities of nature and gain the student mental access to new levels, not explain them in physical terms. Sacred Geometry is a toolbox for spiritual growth and manipulation, rather than for material description.
The concepts of SCIET Dynamics are not obvious unless you are living in an age of scientific achievement, where practical evidence of gases, radiation, electricity, molecules, plasma, gravity, etc are quantified. How could the ancient Greeks even have asked a question like “what is the structure of energy?”, and asked it, how could they have imagined the gestalt of knowledge that revealed the answer like a reverse stencil?
Sacred Geometry reveals the ancient’s knowledge of the physical relationship to spirit and how to affect it with material objects and expressed intention through ritual.
The ancients had the ability to think which would have led them to these answers. They simply lacked the questions.
Where are you? Are you behind your eyes, between your ears, above your spine, beneath the top of your head?
Where is your observing self?
Does imagining a room with all its contents rearranged seem strange, does noticing something has changed while on a walk make you feel out of place? Juxtaposing what is onto what has been or what could be is normal, but how does our mind accomplish this?
If you have asked these questions and tried to answer them, then you may realize that the problem is rooted in a lack of adequate modeling tools.
Backward engineering is our most powerful technique to understand how things work, but backward engineering nature has seemed too immense a task to be entertained by academics or industry. But if they should decide to do this, what would guide them? Would they need a goal to beckon them forward, a vision of that final accomplishment? Would they imagine that there would be something never known or seen before, and if that would be their goal, how would they conceive of it? Certainly, its truths would be true in our world as well, but which truths can be included and which excluded? How can it be possible to back-engineer nature?
I have done this. Fortunately, I did not need to start on the basis of what I learned in the school “system”, but from a foundation of “knowing” created by a synthesis of the knowledge and questions accumulated during an intense time of study and wonder, some call this information a “download”, others an epiphany, but I can tell you that it lasted twenty minutes, or until I became so excited by the information that I could not sit still.
Since then I have created a theory to explain what I learned, naming it SCIET Theory, using an acronym of Single Cycle Integrative Effect Topology. Because I began with the knowledge in my head, and without any form of math to work with, the best I could do was to use my mind as my workshop and develop modeling tools based on thought experiments.
The website supports the idea that you are the center of the Universe. To do this a new form of measurement is needed, one that enables you to track the changes between you and everything else that exists, all the time, throughout your life. This has been done. The development of the SCIET is the answer to this problem. Still, to understand what it is, you will have to imagine the creation before matter existed and then assign every possible point around you an address to use that can also be host to another SCIET. Within that SCIET every defined point becomes a SCIET, and this continues until the ability of the source substrate to measure is reached, which then gives rise to resonance within the entire system.
It is interesting to know that Resonance waits until the end of the cycle of definition to exist. After all, if resonance is not possible until the completion of the definition, the question becomes, “Why not?”
The SCIET exists at the level of Source, and it is the first tool used by the Creator to define the Space within the Source substrate. The SCIET is a special tool designed to work with the Source Substrate and grow stable forms in space. The Source Substrate is made of a field of values that fluctuate into and out of existence, but in doing so, utilizes the energetic form of the tetrahedron, meaning that from the time it exists until it does not, it expresses itself equally in all directions and this creates equidistant expressions. This may seem counterintuitive until you realize that these expressions take place where no other rules exist, they are in a world of their own making. So the SCIET is a created tool to build in, on and within a space entirely defined by on and off pulses so small and fast that they can only be detected mathematically by working back from what can be seen and known.
The SCIET defines conditions that give rise to “quanta”, which are the result of resonance between two points created by the SCIET Algorithm. Resonance can only occur between matching values and until the originating value is reached during the definition process, all changes are internal, reducing the measures between all points of interference within the originally defined measure.
There is no limit on size, smallness, or largeness. The real Universe and the one that you are at the center of, are identical in their conditions. Each depends on the ability to resonate within a unique set of values defined by a first action, an original causal value, a prime number connected to the larger set, and at the same time unique.
The first action is the basis of limitation within a Universe. It controls the rate of change within the system it creates, and defines the interactions of which it is capable. The physical Universe is composed of units (protons) descended from the First Action, and the body is created by cells that are the result of conception, the first action of biological life. The body is at the center of its own Universe and the center of it is a point of resonance descended from the First Action of the Universe. This unique center is an atom formed at the beginning of resonance within the Universe and contains a record of all the changes that have occurred around it since. At the center of this atom is a connection to where the First Action originated, where no time or space exists.
You are a Universe of your own, resonating within your body and within the larger universe, containing the accumulated values of all the changes since the Universe began.
SCIET Theory adds levels of understanding about what is before quanta, about what leads to quanta. The Universe is made of Quanta, or individual units of change accumulated since the beginning of the Universe. Saying that we are at the center of our own universe provides a platform for thought about how this is true.
All the answers are within you. SCIET Theory can unlock them all.